BigSky Tower Cabinet

$16,895.00

A uniquely designed, cost effective and high-efficiency Cabinet to support any tower system electronics.

Tower structures, commonly used for supporting a variety of equipment, one of the largest hurdles is finding the best system to house your electronics to support your new tower.

Big Sky Towers has the optimal solution for your system.

SKU: BST01 Category:

Description

DIMENSIONS

Cabinet:

  • W 75 cm x L 78 cm x H 107 cm
    (W 29.5″ x L 30.7″ x H 42.1″)
  • 86.2 kg (190 lbs)

Shipping :

  • W 101.6 cm x L 101.6 cm x H 122.24
    (W 40″ x L 40″ x H 48″)
  • 90.7 kg (200 lbs)

DIN RAIL MOUNTED HEATER

  • Good for tempuratures -60° (with windchill)
  • Winter: Heat automatically turns on
  • Summer: Air Conditioning automatically turns on
  • Full size furnace pleated with 3M Hepa Filter
  • Anti-spider pre-screens to keep insects out (placed in front of the filters)
  • Expected Filter Life is 10 Years
    (However if located on a farm, it is recommended to be replaced every harvest, as harvesting tends to spread far more than your average annual dust)

BigSky Towers | Heating Cooling SystemBigSky Towers | Spider Proof ScreensBigSky Towers | Ventilation System


SEALED DOORS

  • Removable Doors
  • Accessible from BOTH sides for easy of use
  • Doors are fully recessed
  • High Grade Silicone Rubber Seals
  • Self Turning Steel Locking Mechanisms
    (Turn clockwise to lock the seal and counter-clockwise to loosen)
  • Can be locked with any high grade lock, or shipping container lock
    (Each purchase comes with 10 Shipping Container Locks with traceable serial numbers)

BigSky Towers | Sealed DoorsBigSky Towers | Removable DoorsBigSky Towers | Twisting LocksShipping Locks


CABINET STRUCTURE

  • BOTH Cabinet & Doors are made from 16 Gauge Steel
  • Optimal for both Fire & Security

PRE-CUT LASER ETCHED HOLES

  • All 4 sides have both ½” and ¾ inch holes pre-cut with lasers to accommodate any sized wiring

BigSky Towers | Laser EtchedBigSky Towers | Laser Etched


ROOF & FLOOR STYLING

  • Slightly peaked roof
    (This will allow automatic and optimal water run-off from the roof of the cabinet)
  • Floor of cabinet is slightly peaked to allow condensation to roll away from equipment
  • Floor of cabinet is designed to hold any sized battery
  • Because of peak in the floor and no lip, this allows for easy clean-up of any debris that may have occurred during any installation of modification to the contents of your cabinet.
    (No corners or edges for the debris to get stuck in, or sharp edges to cut your hands or pinch fingers)

BigSky Towers | Structure


DUPONT 2 COAT SYSTEM

  • 1st coat is an alkaloid coating the bonds via special etch
  • 2nd coat adds durability and strength as well as colour

Together it creates an anti-rusting bond to the metal for high corrosion environments


JACK READY

  • 19 Inch Rack Frame 14U Pre-Threaded Holes

BigSky Towers | Jack ReadyBigSky Towers | Jack ReadyBigSky Towers | Jack Ready

Additional information

Weight 56.7 kg
Dimensions 101.6 × 101.6 × 122.24 cm